Wire Rope Systems

Friction and corrosion work together to shorten the effective life of wire rope exposing workers to unsafe environments and organisations to expensive equipment replacement exercises. While wear and damage can be evident on the outer of the wire rope, typically the damage is done to the core and it is not always evident until too late. Effective lubrication can extend the effective and safe operational life of wire ropes, however it is rarely done.

Manual lubrication of wire ropes via the drip, brush, spatula or rubber glove method has always been a difficult and time consuming maintenance task. Typically, messy asphaltic or "blackjack" type products are employed which have coating abilities but very little lubrication or penetration properties ヨ the core of the rope is therefore not lubricated. Wire Rope Lubricating systems eliminates the slow and labor intensive task of manual lubrication and provides fast and effective one pass lubrication of wire ropes from 5/16" (8 millimeters) to 2-5/8" (67mm) in diameter at speeds up to 3,333 feet (1,000 meters) per hour. At the same time achieving more thorough results by forcing lubricant under high pressure right through to the core of the wire rope.

The result is a fully lubricated wire rope with a smooth minimal film of lubricant on the outer strands and lubricant forced through to the inner strands expelling water and other matter in the process.

Wire Rope Systems
Sorry for the inconvenience.

Search again what you are looking for